< Indietro

Lubcon Turmogearoil CLP (gamma)

TURMOGEAROIL CLP EP is a gear oil for high loads and extended oil change intervals.

TURMOGEAROIL CLP EP meets the CLP requirements of DIN 51517.

Special properties
- High load carrying capacity
- Very good corrosion protection
- High ageing resistance
- Low foaming tendency
- Not emulsifying
- Neutral to sleeves and most sealing material
- No corrosion of nonferrous metals up to 100°C

Application

TURMOGEAROIL CLP EP is used for the lubrication of gear drives and bearings with splash or oil circulation as well as for claw couplings, pressure-bearings of roller journals and high loaded joints. The oil is especially suitable for gears and bearings of roller plant frames, calendar, mine-machines, winches and crushing machines and gearboxes in textile machinery e. g. weaving machines.

Note

The most gearbox housings are usually equipped with a protective interior coating. The used coatings are commonly resistant against gear oils based on mineral oil only up to 100°C. This may cause the coatings to dissolve at temperatures above 100°C and lead to gear damage. Therefore, the use of TURMOGEAROIL CLP EP at higher temperatures needs to be tested on a case-by-case basis

 

Disponibile nelle gradazioni: